Buyers 1801105 User Manual download pdf

Quality since 1946

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • buyersproducts.com

Installation Instructions

1801105 2-1/2" Receiver Hitch

1801106 2" Receiver Hitch

Bill of Materials

1 - 1 Hitch, Receiver GM, 2500 & 3500

2 - 6 Washer, Flat 9/16 SAE, Hardend Steel, ZY

3 - 2 Washer, Split Lock 9/16 ZN

4 - 4 Screw, Hex HD Cap 9/16-18 x 2 GR8 ZN

5 - 2 Screw, HHC, M14 x 2 x 40, CL10.9, Black Oxide

6 - 4 Nut, Hex 9/16-18 Center Lock ZN

7 - 2 Nut, M14 x 2, ZN

8 - 6 Spacer Block

item part no. qty. description

—continued on back

Applications

2001-present Chevy/GMC 2500HD & 3500 Pickup

Trucks, 2 & 4 wheel drive

Capacity

16,000 lbs. Maximum Gross Trailer Weight (MGTW)

1,600 lbs. Maximum Vertical Load (MVL)

Tools Required

9/16” Drill Bit

13/16” Wrench

7/8” Wrench and/or Socket

21mm Wrench

22mm Wrench and/or Socket

Torque Wrench

Trucks with factory installed bumper.

1. Remove the two M14 bolts at the rear of the

frame and discard.

2. Position the hitch against the frame and align the

hitch’s rear slots with the frame’s M14 weldnuts.

3. Fasten hitch to frame with two M14 x 40mm

screws, lock washers and reinforcement blocks in

the hitch’s rear slots as shown in ﬁgure 1. Do not

tighten completely at this time.

4. Install two 9/16 x 2” screws, reinforcement

blocks, ﬂat washers and lock nuts in the forward

most holes as shown in ﬁgure 1. Do not tighten

completely at this time.

5. For short bed trucks, the center hole must be drilled

at this time. For long bed trucks, skip to step 6. Using

the center hitch holes as a template drill two 9/16”

holes in the frame. Be careful not to drill into any lines

or wire harnesses on the back side of the frame.

6. Install two 9/16 x 2” screws, reinforcement

blocks, ﬂat washers and lock nuts in the center

holes as shown in ﬁgure 1.

7. Using a torque wrench, torque the M14 CL10.9

bolts to 135 ft-lbs and torque the 9/16” G8 bolts to

120 ft-lbs.

ITEM DESCRIPTION QTY

HITCH, RECEIVER GM, 2500 & 3500

2 WASHER, FLAT 9/16 SAE, HARDENED STEEL, ZY 6

3 WASHER, SPLIT LOCK 9/16 ZN 2

4 SCREW, HEX HD CAP 9/16-18 X 2 GR8 ZN 4

5 SCREW, HHC, M14 X 2 X 40, CL10.9, BLACK OXIDE 2

6 NUT, HEX 9/16-18 CENTER LOCK ZN 4

7 NUT, M14 X 2, ZN 2

8 SPACER BLOCK 6

TRUCKS WITH

FACTORY BUMPERS

FIGURE 1

8' BED - EXISTING HOLE

6' BED - DRILLED HOLE

BUMPER BRACKET

EXISTING

WELD NUT

1 2

Summary of Contents

Page 1 - Installation Instructions

Quality since 19469049 Tyler Blvd. • Mentor, Ohio 44060Phone (440) 974-8888 • Fax (440) 974-0165Toll-Free Fax 800-841-8003 • buyersproducts.comInstall

Page 2 - Figure 2

Quality since 19469049 Tyler Blvd. • Mentor, Ohio 44060Phone (440) 974-8888 • Fax (440) 974-0165Toll-Free Fax 800-841-8003 • buyersproducts.com3009033

Comments to this Manuals

No comments

Buyers 1801105 User Manual

Browse online or download User Manual for For the car Buyers 1801105. Buyers 1801105 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Buyers 1801105