Buyers 5051105 User Manual

Browse online or download User Manual for For the car Buyers 5051105. Buyers 5051105 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1
1. Secure the mounting extension to the Mounting holes of
the liftgate using eight 3/8" bolts, eight washers, and eight
locknuts. (fig. 1)
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
continued inside
installation
manual
MOUNT KIT
5051105
GM 1500/2500/3500
2007+
full size truck
LiftDogg
3. Tail light Remounting. This step must be done prior to
install the Liftgate so lens can be replaced without removing
the Liftgate. (fig. 2)
a. Remove four factory tail light screws on both sides.
b. Remove the tail light lens.
c. Remove any tailgate accessories that haven’t done
previously.
d. Install the tail light lens without factory fasteners.
e. Install the M8 x 1.25 x 12 bolts and tail light clips
provided. This is mounted at the tailgate cable catch
bolt. Push the clip forward to have a rigid support when
tightening the screw.
truckmount
Fig. 1
2. On the truck, remove the tailgate and tailgate hardware.
Tailgate will not be reused.
a. Remove the striker when the tail light is loosened later.
b. Remove the rear bumper. Be careful not to drop the
bumper when unfastened the bolts/nuts.
c. Remove the spare tire access plug (trucks key is needed).
d. Remove the spare tire temporarily.
e. Remove the hitch for now.
Tail Light Bolt
Tail Light Bolt
Striker
Apply Pressure When
Install Light Bracket
Fig. 2
Secure the 8 Bolts to the Liftgate
Mounting Extension
Bottom Holes not Used
Page view 0
1 2 3 4

Summary of Contents

Page 1 - LiftDogg

11. Secure the mounting extension to the Mounting holes of the liftgate using eight 3/8" bolts, eight washers, and eight locknuts. (fig. 1)9049 T

Page 2

24. Install the Tube Holder for the spare tire. (fig. 3)a. Place the Tube Holder on the rear inside lip of the box.b. Mark two 1/4" holes by trac

Page 3 - IN MFG ASSEMBLY

315. Repeat for the Driver Side installation. Re-install tail light lens if it was removed earlier.16. Verify the spare tire access holes to be availa

Page 4

4There May Be Some Left Over Fasteners After Installation 1 3 4 5 6 9 10 11 18 19 14 17 15 20 2 7 8 12 21 13 14 14 15 16 9049 T

Comments to this Manuals

No comments